Peratech Holdco Logo

M2436-100148-ZF

100 x 148mm, 24 x 36 3-dimension matrix force sensor with bonded flexible printed circuit tail for connection into the MT-TPU-020 (Multi-Touch Touch Processing Unit)


QTC Multi-force Matrix Sensors provide true pressure sensing feedback as well as position information. As force is applied to the individual sensels in the electrode array, the resistance output drops at each touch point.

A pressure map can then be plotted for the whole sensor. Multiple touch point positions and pressure can then be interpolated and palm rejection is also possible.

The rows/columns in the matrix are continuously scanned to sense multiple force touches simultaneously – providing true 3D next generation multi-force data.


  • Multi force 3D touch sensing X, Y, & Z
  • Low power consumption at rest
  • Multi touch and multi force gestures possible
  • Configurable keypad with sliders scroll wheels etc.
  • Minimal RFI interference, strong signal to noise ratio
  • Glove finger, passive stylus, finger nail, wet operation
  • Force interpolation reduces required sensor lines
  • Works under multiple materials
  • Trackpads, under-display touch
  • Large format multi-touch surfaces
  • PET substrate: MacDermid AutoSTAT CT4, 100µ thickness
  • Carbon prints: Loctite ElectroDAG 6017SS E&C
  • Silver prints: Loctite ElectroDAG 725A E&C
  • Dialectric print: Dialectric ink
  • QTC® print: QTC® Screenprint ink
  • Adhesive spacer: 3M 467 200MP 50µm PSA
  • Flex tail: Custom design flex tail, 50-way, 0.5mm pitch at smaller end for connection to Peratech TPU hardware
  • Advantages
    • Multi force 3D touch sensing X, Y, & Z
    • Low power consumption at rest
    • Multi touch and multi force gestures possible
    • Configurable keypad with sliders scroll wheels etc.
    • Minimal RFI interference, strong signal to noise ratio
    • Glove finger, passive stylus, finger nail, wet operation
    • Force interpolation reduces required sensor lines
    • Works under multiple materials
  • Applications
    • Trackpads, under-display touch
    • Large format multi-touch surfaces
  • BOM
    • PET substrate: MacDermid AutoSTAT CT4, 100µ thickness
    • Carbon prints: Loctite ElectroDAG 6017SS E&C
    • Silver prints: Loctite ElectroDAG 725A E&C
    • Dialectric print: Dialectric ink
    • QTC® print: QTC® Screenprint ink
    • Adhesive spacer: 3M 467 200MP 50µm PSA
    • Flex tail: Custom design flex tail, 50-way, 0.5mm pitch at smaller end for connection to Peratech TPU hardware